How to maintain the gears or drive shaft of the yikong yk4107 rc car?

Cleaning: Use a soft brush or cotton swab dipped in alcohol or special cleaning agent to clean dust and stains, and make sure they are dry.

Inspection: Check the meshing of the gears and the fixing of the drive shaft to ensure that the tightness is appropriate, and there are no loose screws, bending and deformation of parts, etc.

Lubrication: Use gear oil or grease for gears, and low-viscosity silicone oil for drive shafts. Apply evenly with a toothpick or cotton swab to avoid excessive application.

Here is a grease recommended. What are its characteristics?

Brief description:

This product is different from ordinary grease. This product uses synthetic lubricating oil that does not produce sludge and inorganic thickeners with ultra-fine particles. When the temperature exceeds the high temperature of liquid lubrication, the special individual lubricant it contains will effectively exert its lubrication effect. The high-density individual lubricant is integrated with the bearing, and can run lubricated for a long time without refueling.

Features:

• It will not flow even at high temperatures;
• Available temperature range: from -30℃ to 360℃ (non-oxidizing state);
• It can run continuously for a long time without refueling;

Application:

• Model car/ship/aircraft gears;
• Model car/ship/aircraft transmission shafts;
• Lubrication of movable joints, etc.

About the YIKONG YK4107 RC Crawler:

Note: When purchasing original accessories, please follow the accessory number. We will ship the goods according to the accessory number.

BACK TO TOP